S.K. Scientific And Surgicals

A Cylindrical Horizontal Autoclave with Double Wall Construction is a high-performance, pressure-rated sterilization or curing chamber, designed primarily for thermal processing under pressure. The horizontal cylindrical configuration ensures uniform pressure and temperature distribution, while the double wall (jacketed) structure enhances heating/cooling efficiency, safety, and durability.

Commonly used in medical, pharmaceutical, biotechnology, food processing, rubber curing, composite manufacturing, and research sectors, this type of autoclave supports batch processing with precise control over temperature, pressure, and sterilization or curing cycles.

The Fully Automatic Horizontal Rectangular Autoclave (available in single door or double door/pass-through models) is a high-capacity, pressure vessel designed for sterilization or thermal treatment of instruments, materials, or components under saturated steam conditions. Its rectangular chamber maximizes internal usable volume and efficiency in bulk or large-load processing, making it ideal for hospitals, pharmaceutical plants, laboratories, research facilities, and food processing units.

The fully automatic operation enables precise control over all sterilization parameters, reducing human error and ensuring repeatable, validated results. The double-door configuration offers contamination control for cleanroom or aseptic applications, while the horizontal orientation supports ergonomic loading and unloading of trolleys or trays.

A Rectangular Horizontal Triple Wall Autoclave is a high-performance, high-capacity steam sterilizer designed for applications where rapid heating, uniform sterilization, and efficient drying are critical. The triple-wall construction ensures precise thermal control, faster cycles, and energy efficiency by incorporating:

1. Inner Sterilization Chamber

2. Middle Steam Jacket

3. Outer Hot Water Jacket / Insulating Layer

This configuration is ideal for hospital CSSDs (Central Sterile Supply Departments), pharmaceutical manufacturing, biotech labs, and research institutions, where compliance with international sterilization standards is mandatory.

The Cylindrical Horizontal Triple Wall Autoclave is a high-capacity, pressure-rated sterilization system designed to deliver uniform, efficient, and reliable steam sterilization for a wide range of applications. Its horizontal cylindrical chamber allows for easy loading and unloading, while the triple-wall construction ensures rapid heat-up, improved thermal stability, and enhanced safety.

Ideal for hospital CSSDs, pharmaceutical production, biotechnology laboratories, and research facilities, this autoclave is engineered for long service life, energy efficiency, and compliance with global sterilization standards.

With an objective to fulfill the demands of our clients, we are engaged in manufacturing a wide array of Vertical Autoclave.

Features:

• High functionality
• Long working life
• Easy maintenance

The Inner Chamber and Outer Wall are made of Stainless Steel. Ring is made of Stainless Steel. Lid is made of Stainless Steel tightened by radial arms through a steering wheel made of Chrome plated Mild Steel/Stainless Steel.The instrument is absolutely leak proof. Equipped with Pressure Gauge, Safety Valve, Double Safety Valve, Steam Release Valve, Rubber Gasket, Inner Container, S.S. Bucket, and Mild Steel Legs for autoclave. The autoclave can hold the pressure in between 5 psi to 20 psi. 

The sterilizer is based on the principle that microbiological action of saturated steam at elevated temperature is rapid and through. All models work on principle of downward displacement of air which is most economical method of obtaining sterilization. Construction:- Double Walled Inner Chamber 16g and Outer Cover are made of S.S. 304 grade material. Lid is made of S.S. Radial Locking is made of Mild Steel Chrome Plated/S.S. Stainless Steel.Autoclave is mounted on tubular Stainless Steel frame with ground leveling screwed flages. Boiler is made of 304 S.S. Equipped With:- The Pressure Control Device, Digital Timer, Digital Temperature, Low Water Cut off Device and Buzzer on completion of cycle is incorporated. Operating Temp & Pressure:- Sterilizing Temp : 120º to 126º C Sterilizing Pressure : 1.2 to 1.5 Kg/cm (15 psi- 20 psi)

Seamless construction ensures bacteria free environment.The unit is made of Stainless Steel. Equipped with Pressure Gauge, Safety Valve, Double Safety Valve, Steam Release Valve, Vacuum Release Valve, Rubber Gasket, Inner Container, Inner Tripod Stand and Mild Steel Stand for autoclave.

The ULV Micro Fogger is an advanced disinfection and pest control device that uses Ultra-Low Volume (ULV) cold fogging technology to disperse disinfectants, biocides, fungicides, or insecticides in fine micron-sized droplets. It is highly effective for indoor and outdoor applications, especially in healthcare facilities, commercial spaces, food processing units, and public areas.

The Multipurpose Portable Fumigator is a compact, efficient, and easy-to-use device designed for disinfecting and sterilizing a wide range of environments. It converts liquid disinfectant into fine vapor or mist for effective coverage of surfaces and air spaces. Ideal for use in hospitals, laboratories, clinics, commercial spaces, and pest control operations.

The Vertical Wing-Nut Autoclave is a compact, manually operated steam sterilizer designed for small to medium-sized sterilization loads. It is ideal for hospitals, clinics, laboratories, academic institutions, veterinary centers, and small-scale pharma/biotech setups.

This type of autoclave uses a vertical cylindrical chamber and a lid secured by wing nuts, making it simple, rugged, and cost-effective. It operates on the principle of gravity displacement or manual air venting, typically using saturated steam at 121°C – 134°C under 15–20 psi pressure.

A Vertical Autoclave with Radial Locking is a vertical cylindrical steam sterilizer designed for efficient, compact, and safe sterilization of instruments, labware, dressings, culture media, and other materials. Unlike wing-nut models, it features a radial arm locking system for faster, safer, and more uniform lid sealing.

Commonly used in hospitals, clinical labs, research institutes, microbiology labs, and small pharma/biotech production, this autoclave offers reliable sterilization performance in a vertical, space-saving format.

The Vertical Triple Wall Autoclave with Radial Locking is a robust, high-efficiency steam sterilizer designed for precise and consistent sterilization in medical, pharmaceutical, laboratory, microbiology, and veterinary applications. Its triple-wall construction ensures superior thermal efficiency and safety, while the radial locking system provides secure, uniform lid sealing with ease of operation.

This model is ideal for daily high-throughput use, where sterilization of glassware, instruments, culture media, and bio-waste is essential under stringent conditions.

Autoclaves are pressure vessels used for steam sterilization, and they are commonly constructed from either Stainless Steel (SS) or Aluminum, depending on their intended use, durability, cost, and sterilization load type.

This document outlines the differences, features, and suitable applications of both Stainless Steel and Aluminum Autoclaves.

Wing-nut autoclaves are manually operated vertical steam sterilizers commonly used in clinics, laboratories, veterinary practices, remote healthcare, and educational settings. These are available in two main variants:

• Electric models – use built-in heating elements for steam generation

• Non-electric models – require external heat source (gas burner, open flame, or steam line)

Both models use a wing-nut lid locking mechanism, offering a cost-effective and reliable solution for basic sterilization tasks.

The Class B Tabletop Autoclave is a compact, high-performance steam sterilizer designed for comprehensive sterilization of all types of medical and dental instruments, including hollow, porous, and wrapped items. It uses pre-vacuum and post-vacuum cycles (per EN 13060 standard) to ensure maximum sterilization efficiency and quick drying, making it ideal for clinical and laboratory use.